March 22nd

March 22^nd

Todays studio session didn’t take place due to performance.

March 15th

March 15^th

Today I used the editing suite, because all of the over studios were occupied. My intentions for today were to record some basic percussion for my 2^nd FMP. I chose to record a Bongo, Wood block and a Tambourine. I already had midi parts of each of these instruments laid out on my composition already, but I thought it would be a good idea to have each of these played in as live instruments rather than samples. To record the bongo I used the SM57 placed quite closely to the skin of the drum. I chose to use the SM57, as I wasn’t after too much detail in the sound, I wanted to capture just the effect of two consecutive rhythmic hits, rather then the noises and ambience created by the bongos.

For the Tambourine and Wood Block, I used the c1000, as this microphone is a condenser, so therefore more sensitive. Which is what I required for these to instruments, as I wanted to pick up all the details and accents occurred when playing each of these. For both of these the microphone placement was quite similar, I set the microphone up in one corner and played the each of the instruments about half a metre away away.

March 8th

March 8^th

Absent

March 1st

March 1^st

In today’s studio session we came across a problem, with Doms FMP logic file. Each time he loaded it, it went out of time, we tried alternatives logic files of the same project, but we still had the same problem. After a while Stevie figured the problem out and fixed it for us. After this Dom wanted to record some sounds of people clapping so that he could replace a sampled clap within his project with a live one. For the recording we used an AKG 414 and each took turns clapping.

We also shared the studio this week, so for the second half of the session, me, Ruben and Dom were in the editing suit. As Ruben and Dom had nothing to do, I used this opportunity to finish of composing one of my projects for my FMP.

February 8th

February 8^th

Arranged guitar in preparation for mixing

In today’s studio session, I was the arranging the guitar that I had recorded the previous week. I started off by listening to what I had, and then I began to cut out the parts that were out of tune, and didn’t suit the composition. Once I had finished this process I arranged the guitar, alongside the verses and choruses. So that it was ready for the mixing process.

Monday 1st February

Monday 1^st February

Prior to today’s studio session, I done some research on different types of microphone placements and microphones that I could use for recording. I considered loads of different placements and microphones. My initial idea was to use a single SM57 placed at the sound hole, but I decided not to go with this, as it wouldn’t capture the sounds that I wanted, the SM57 gave a warm flat sound, I decided this wouldn’t suit the mix. As I was after something more bright and crispy, which was more possible to capture with a condenser microphone, so I decided to use 2 AKG C451, to capture a stereo recording one placed at the sound hole and one half way down the fret. So that they captured both the main sound and the sound of the fingers brushing back a forth whilst playing the notes.

Today’s studio session was quite hectic all 3 of us made use of having the guitarist in the studio, first I recorded, and had Ruben and Dom as my sound engineers, and we alternated when it was each other’s turn to record.

Me and Ruben both used an acoustic guitar and went for a similar set up. In the live room we created a kind of isolation chamber, in case the drum kit in the room affected the natural reverb.

The recording process for mine didn’t take too long; Dan had thought of two ideas for the composition, a rhythm section and lead guitar section, I recorded full 56 bars for the lead guitar, so that a had a lot of audio to select from when it came to the arrangement process.

Ruben already had a guitar section laid out in midi, which he wanted Dan to recreate.

Dom wanted to record an electric guitar, this involved us changing the studio set up that we had, we kept the isolation chamber and closed mic’d a guitar amp with an SM57 microphone

I will post some images soon of each of these set ups.

Monday 25th January

Monday 25^th January

This week’s studio session, I assigned the role of a studio engineer for Rubens recording. He wanted to record live drums on a piece he had previously composed, as a studio engineer it was my role alongside the over studio engineers to prepare the live room, i.e. task such as assembling the kit to the players requirements, getting the microphones and stands to the correct positioning, as it was Rubens project he selected the microphones that he wanted to use, for the kick drum we used the AKG D112, for the snare we used the Shure SM57, for the hi hat an AKG CI000, and for the overheads we used the AKG C451.

Along the way we had some minor problems with the XLR cable on the right overhead, the faulty cable was causing the signal to peak, to solve this we changed the cable